We have excellent products for the offline coating over conv. Ink’s printed sheets

The water based primer closes the surface and prevents the absorption of the UV coating into the substrate and the inks to a large extent.

Product Range 

UniCure 10 RC

UniCure 15 RC

UniCure 18 RC

UV coatings for the application on UV ink enable a high level of finishing with good RR Properties.

UV coatings are especially suitable for non-absorbent substrates, such as Met PET laminated boards.

High machine speeds and a good adhesion can be achieved

Product Range : UniCure 14RC

Unprinted/sub-standard substrates have inconsistent lay, high absorbency and a high moisture content .

This phenomena cause poor spreading of UV Coatings and moisture to escape while the coating is being cured.

 This tendency to vent gases during the curing process often leads to the finish developing pin holes and other defects.

Product Range : Unicure 14 RC

The technology allows sub-standard substrates to be coated with a smooth finish not achievable with standard UV coatings.

This technology opens new opportunities for the production of sustainable, low cost, aesthetically pleasing and properly sealed package .

Product Name : UniCure 17RC

Viscosity: 55 Sec. @ 25 DC, Ford-cup-4

Product Features:

• Very high flexibility
• Excellent substrate wetting 
• Good Gloss
• Good Fold Resistance at edges ( after cutting)
• Good Scratch Resistance

Product Name : UniCure 16RC

Viscosity: 40 Sec. @ 25 DC, Ford-cup-4

Product Features:

• Very high slip ( Less COF)
• Excellent substrate wetting ( super coating lay)
• Good Gloss
• Sharpness at edges ( after cutting)
• Good Scratch Resistance